It is made of polytetrafluoroethylene propylene resin, which has excellent resistance to high and low temperature, chemical corrosion, high insulation, non-viscosity and light transmission.

Main features:

1. Smooth surface, transparent color and good wear resistance.

2. Acid resistance, alkali resistance and corrosion resistance.

3, temperature tolerance: - 70 ℃ ~ + 260 ℃ (continuity)

4. Elongation: 100%, voltage breakdown: 25KV

5. Do not moisten with any object below the melting point. Above melting point, with F4, metal have good adhesion relay. And self-adhesive (thermal seal)

6, prevent stickiness, spell water, oil, water contact Angle theta = 114 °

7. Electrical reliability, high insulation, and dielectric constant adhesion at high and low temperatures of 60hz-60mhz are all 2.1. Even if the surface is damaged by diving, there will be no conductive orbit. Arc resistance > 165 seconds no leakage

8. High transparency, good penetration of ultraviolet ray and visible light; It has the lowest refractive index relative to other plastics.

FEP transparent tape can be used in most oil field cables, industrial cable winding, etc. FEP tape USES a silicone adhesive that resists oxygen, ozone and ultraviolet light. Although silica gel is the standard adhesive of FEP, acrylic acid can be provided as required. Standard FEP tape has 0.05-0.08 "thin film, 0.05" silica gel - total 0.10-0.13mm ", width 1/8 "-13". Other thicknesses are available. FEP film can be used for wire foot, sheet or reel sales thickness of 0.02 "to 0.8".

Fohn has the ability to cut FEP film into any specification, including specific 3D printing bed requirements.

The company can apply a variety of 3M adhesives to a specific film size. Polyperfluoroethylene propylene (FEP, F46) film.